Subject | Text |
| You could test them all to ground with your ohm meter...
Or remove the HOT, connect a 100 Watt gl |
| [quote:7fb4c22fbd]Check .47 ohm resistor RF801S. 1 watt. See if it's changed in value.[/quote:7fb4c2 |
|
| The program of a protected PIC can be read. Even Microchip acknowledge this .
See for example "PIC |
Compaq V75 Monitor starts then dies after one second | Hello friends,
I have 3 Compaq V75 monitors that have the same symptoms. When the power plug is con |
| Is this external power supply or build in?
If it is external, just buy an adapter with proper power |
service manual/schematics for Realistic 100W PA amp. | I am looking for schemantics or a service manual for a Realistic 32-2023 100W public address amplifi |
SONY STEREO PROBLEM | Hi everyone,
I have problem with my stereo (SONY HCD-XB3) The unit is completely dead.I found one |
| While you could use a 2 watt in place of it, it would be underrated and it looks more like a 3 watt |
power amp measurments | Hello
when i repair a power amp i want to check the power of output (watt) and if everything is o |
Polaroid 1913-tdxb service manual request-Please Help | I am looking for the service manual of Polaroid 1913-tdxb LCD/DVD combo.
My tv does not power on. |
Problem with Philips C2082DAS | I got problem with my Philips C2082DAS monitor.
When I power it, LCD shows FW version and then it i |
| A two prong power plug means that the device is double insulated and either requires no earthing or |
| Could be short circuit at regulator output, try to disconnect power amplifier then turn it on again, |
Nad 2200 service repair manual wanted!!! please help me!!!! | Hey,if there somebody that can uppload a service repair manual to this amplifier? thanks
here is |
pioneer pro 119 converg. board resistor R2604 | this is a solid white resistor thats marked as a 2.2 ohm-J and is reading at 1.3 ohm. i want to repl |
| R445 1 ohm .5 watt
Yes, you need the resistor to read a voltage from cathode of diode to chassis g |
Re: Magnavox 20MS2331/17 TV shuts off after few seconds | [quote:90431984b4="Syne"]When I turn the tv on it remains blank for a few seconds and then a horizon |
|
service manual for CASIO KEYBOARD CTK-601 pls? | My casio keyboard stopped working after it was left ON overnight. The red LED can be ON but there i |
TV DOES NOT COME ON | I have a Pioneer Elite PRO-100 that was turned ON and working. I left the room and when back the TV |
schematic - Pioneer | I need schematic for:
- amplifier: SA-310
- cass: CT-300
- tunner: TX-410
[email protected] |
PHILLIPS TV SPEAKERS | HELLO, To begin with the addition of speakers to a unit has to involve the understanding of the tot |
potentiometer / rheostat questions | Hello,
I have some 12 volt DC "rope lights" I am putting in my motor home. I am trying |
120 Volts TX | Frank, What is your mains voltage in your country ? ( 110, 220 ?)
If you put 220 Volts on a 120 V |
| Let me correct that: That first info is for RX-316BK.
THIS IS FOR RX-317TN:
QRG022J-101AM 100 OHM |
| Zener 6079 (9.1V) is shorted. R3045 measures 1.8 ohms.
If anyone else needs to know in the future, |
transformer smokes | I am repairing a power supply for a scientific instrument. When I recieved it, it would not turn o |
repair it | A short circuit is the most probable cause t o this problem,
I have the same problem with my KA-V75 |
RESISTOR PROBLEM | HELLO, The first thing I would ask is what the amps total of the circuit would be that this fuse is |
| I really don't know to much about recievers but I've allways fixed my own thanks to theese boards. I |
| R7731/7736/7725/7716/7721/7711 1.8 ohm 1 watt. |